Hardware for EMRG Mk I Firing
This document contains a list of items to be brought to any EMRG firing to prepare the system. This is not a complete list, so items should be added as needed. Some items on the list are included to allow for field modification and repairs, but in the event that a major change is necessary, the firing shall stop and the change made and tested before continuing.
EMRG Mk I Hardware
- Fire Control Box
- Power Control Box
- Projectile
- Power Cable
- Control Cable
- Data Cable
- Firing Pin
- Ground Wire
- Ballistic Trap (AKA, the target)
- EMRG Mk I
Safety Equipment
- Safety Glasses, Tinted for all personnel
- Earplugs, for all personell
- One (1) Fire Extinguisher
Wrenches
- Two (2) 7/16 inch (11mm) wrench
- One (1) 3/4 inch (19mm) wrench
- One (1) Torque Wrench
- One (1) 3/4 inch (19mm) socket for torque wrench
Screws and Screw Drivers
- Two (2) wood-screws to secure ballistic trap
- Flathead Screwdriver
- Philips Screwdriver
Extra Wire and Wire Managements
- Extra Wire (16-22 gauge) in Red, Green, and Black
- One (1) set wire strippers and crimper
- One (1) Soldering Gun and Solder
- One (1) roll electrical tape
Additional Supplies
- One (1) Roll of Duct Tape
- One (1) Drill
- One (1) Set Drill Bits
#