Introduction
For this document, it is assumed that a minimum of two people are present at the firing:
- The Firing Director (FD)
- The Safety Officer (SO)
However, it is suggested that the following people be present as well:
- The Operations Overseer (OO)
- The Data Recorder (DR)
For more on the positions, see Responsibilities of the Rail Gun Team.
-
-
Pull manual discharge pin.
-
Turn off Nitrogen.
-
Bleed off excess nitrogen.
-
-
-
Remove injector assembly.
-
Remove all connected wires from EMRG.
-
Replace aluminum shorting rods.
-
Almost done!
Go back to the Preparation for Firing Guide.
Conclusion
Go back to the Preparation for Firing Guide.